Textile-Polymers

Physical form      :    Off white Solid
Diluent               :    Water
Solid content       :   98 ± 2%
Nature                :   Nonionic

ZYTERGE BASE should be used at 0.1-0.3% on the weight of the bath PRESCOURING APPLICATION. Scouring efficiency can be boosted when it is used in conjunctionwith scouring chemicals.

ZYTERGE BASE performs well as an in-bath lubricant for polyester, acrylic and other synthetics for DYEING APPLICATION. Usage level recommended is 0.1 – 0.3% for prevention of crease and crease marks.

ZYTERGE BASE should be applied at 0.5 – 0.7% for PAD APPLICATION at normal weight pick to achieve SOIL RELEASE properties on polyester fabrics. ZYTERGE BASEis durable for greater than 5 home launderings. 0.5 – 0.7% on the weight of goods at 65° C for 15 minutes should be used for EXHAUST APPLICATION.

ZYTERGE BASE is a concentrated product. It should be pre-diluted in water before adding to any dye bath.  Compatibility of chemical bath needs to be checked.

¤  Keep the bags of ZYTERGE BASE in a cool shade. Do not store in direct sun or at a temperature
higher than 40° C.
¤  In case the bags are open and are intended to be stored for a longer time, ensure to tie and seal
the mouth to avoid moisture contact.

VELVETROL can be applied by padding exhaust process. Recommended dosage for various fabrics and their blends is 2 gpl to 10 gpl at 70% wet expression.

VELVETROL can be applied by padding method by varying dose from 2 gms/ltr. to 10 gms/ltr. at 70% wet expression as per finish requirement.

VELVETROL can be applied by exhaust method with varying dose between 0.5% to 1.0% on weight of fabric as per finish requirement.

Specific Applications

• 100% Polyester Sarees and Dress Material:
  VELVETROL gives bouncy, soft and smooth result with good fall to Polyester varieties.
  It can be applied at 15 gms/ltr dosage to achieve best results.
  
• P/V Suiting variety :
  On P/V Suitings, VELVETROL gives good crease resistance, bounce and staple finish results.
  
• Combination of LUSHFEEL and VELVETROL on Polyester and Shirting varieties:
  3 gpl LUSHFEEL and 6 gpl VELVETROL leads to excellent finish results on Polyester-Cotton blended variety.

Precautions while using VELVETROL

• VELVETROL should not be applied to high shear condition during application like Jet Machines.
• VELVETROL should not be subjected to high temperature conditions (i.e. above 180 ⁰C )
• Overdose of VELVETROL may cause thermomigration problem.

Store in a cool and dry place (below 40°C ). Keep the drum tightly closed and avoid inhalation. Shelf life of VELVETROL is 3-6 months.

VELVETROL can be applied by padding exhaust process. Recommended dosage for various fabrics and their blends is 2 gpl to 10 gpl at 70% wet expression.

VELVETROL can be applied by padding method by varying dose from 2 gms/ltr. to 10 gms/ltr. at 70% wet expression as per finish requirement.

VELVETROL can be applied by exhaust method with varying dose between 0.5% to 1.0% on weight of fabric as per finish requirement.

Specific Applications

1. 100% Polyester Sarees and Dress Material:
   VELVETROL gives bouncy, soft and smooth result with good fall to Polyester varieties.
   It can be applied at 15 gms/ltr dosage to achieve best results.
   
2. P/V Suiting variety :
   On P/V Suitings, VELVETROL gives good crease resistance, bounce and staple finish results.
   
3. Combination of LUSHFEEL and VELVETROL on Polyester and Shirting varieties:
   3 gpl LUSHFEEL and 6 gpl VELVETROL leads to excellent finish results on Polyester-Cotton blended variety.

Precautions while using VELVETROL

• VELVETROL should not be applied to high shear condition during application like Jet Machines.
• VELVETROL should not be subjected to high temperature conditions (i.e. above 180 ⁰C )
• Overdose of VELVETROL may cause thermomigration problem.